Go to homepage
Go to homepage
CHF 0.00

Bernoulli Gripper ZNC-C

Don't lose your gripGet a more accurate grip – Reduce the impact of air flow on light-weight workpieces and adjacent workpieces.Handle your workpiece tightly – Prevents lateral slide of slippery or irregular shaped workpieces.Use it directly on food – FDA and EU1935-compliant rubberAvoid system contamination – There is no risk of suctioning powder matter adhering to the workpiece into the device and pipe. • Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

Filter products

ZNC20-C

ZNC20-C

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC20-CS

ZNC20-CS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC20-CV

ZNC20-CV

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC20-CVS

ZNC20-CVS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC20S-C

ZNC20S-C

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC20S-CV

ZNC20S-CV

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC20S-CVS

ZNC20S-CVS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC30-C

ZNC30-C

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC30-CS

ZNC30-CS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC30-CV

ZNC30-CV

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC30-CVS

ZNC30-CVS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC30S-C

ZNC30S-C

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC30S-CS

ZNC30S-CS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC30S-CV

ZNC30S-CV

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC30S-CVS

ZNC30S-CVS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC40-C

ZNC40-C

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC40-CS

ZNC40-CS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC40-CV

ZNC40-CV

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC40-CVS

ZNC40-CVS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC40S-C

ZNC40S-C

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC40S-CV

ZNC40S-CV

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC40S-CVS

ZNC40S-CVS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC60-C

ZNC60-C

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

ZNC60-CS

ZNC60-CS

• Size: Ø 20, Ø 30, Ø 40, Ø 60, Ø 80 • Lifting force: Up to 15.4 N • Body material: Stainless steel, aluminiumVibration supression cover. Vibration noise during adsorption is reduced as low as 17dB in thin workpieces • Multiple ports can be used as sensor or release port.

This website uses cookies to ensure the best experience possible. More information...